I'm using Wildfire 3.0 and Creo 2.0 on same PC
but there is a display problem only Creo 2.0 like below images
and I have tried to change config and graphic options.
please let me know how to solve the problem.
thank you
-edge_display_quality very_high
-shade_quality 50
-display_shilhouette_edges
-skip_small_surfaces
-default_abs_accuracy 0.00012 (1.2e-4)
-set antialiasing mode on
-Control Pannel/ Graphic Card:Manage 3d setting: PTC Pro/Engineer / Creo 2.0
Hi,
I have an assembly in CreoView MCAD where I need to rotate a lot of different parts and subassemblies for illustration/simulation purposes. The default rotation center/axis is somewhere in the middle of the parts, so I have to change the rotational axis to a specific axis/cylinder by selecting Location->Select Coordinate System. But this seems to change the "global location" for rotation, so when I select another part for rotation it will rotate around the previuos selected axis, so then I have to reselect for a new rotation axis. The question is: Is it possible to store a specific rotation axis for specific parts/subassy? So that when I select a certain part, the specified rotation axis is defined for that part? Would save me a lot of time if this was possible.
Rubik's Cube, A 3-D mechanical puzzle....
do u ever tried mechanism for it in Creo.. if not try it see attechment and hv fun ^^)
Message was edited by: DalbeerSinghSohal
I don't know what to call this thus the horrible title. When I right click on a part in an assembly I get a bunch of actions listed out.
I was watching a video on PTCU where the instructor had icons next to his actions and was wondering if this is a config setting, etc. Anyone know?
Hello!
Im from germany, so please don't mind my bad english :-)
I've got a problem with Creo Parametric 3.0 on Windows 10 (64bit)
The last weeks Creo works fine, but today I grabed accidentally my "Platzierung/Placement" button and now all the parameters disappeared.
I can't do any new placements now.
I already restart the system 2 times and completly reinstalled my Creo Software. The other buttons (Bewegung/move) working fine!
The only thing I can do is "Alt +Tab" to make the Placement window visible, but I can't change anythink because when I click on it, it disappears again.
Thanks a lot for your help, and have a nice day!
On several of our workstations, whenever a dxf/dwg thumbnail drawing is created and viewed in Windchill 10.1, using Creoview Lite 2 or 3 (tried all revisions) the degree and diameter symbols on the screen (and in print) turn into the wrong font mapped symbol and become a tilde and a lowercase "n" -- this only happens with specific machines. Windows 7, 64bit. Others display the same symbols on the same drawings just fine. Different video cards in these PCs/laptops. Tried latest video drivers. Any ideas would be greatly appreciated. See graphic. 
I received a creoview file from a customer and it is showing all dimensions, notes & datums. Is there a way to turn these off so that I don't see them?
Hello,
We intend to create 3d E-learning modules for our internal employees.
The modules would have information about products, usage with interactivity.
[Like Assembly & Disassembly of components, Component identifications, simulate diagnosis of problem and solution in virtual environment,event driven, designing a user friendly user interface etc]
For reference, we would like to compare Creo tools with 3DVia Studio/Composer, Quest3D & Vizard.
Do Creo tools have similar/better capability? If not illustrate then please suggest which tool would work for us.
Thanks for your time
- Dhananjay
Is there a setting so that I can control the attachment and placement of balloons when they are created? In the past, and I've been a user since '97, when a balloon was placed, you controlled both. Now I have to create the baloon, move the balloon, move the attachment.
I use 3d views in a variety of orientations, and the cleanup tools do not help, and they don't help with the attachments.
This means a single baloon takes about 12 click, and I have assemblies with over a hundred parts. You do the math.
Is there a setting that gives me back control of the balloon process?
Shouldn't Creo View import STEP files with curves?
Does somebody know how to customize render mode in Creo Illustrate?
E.g. two different modes for big and smaller assemblies with different line thickness.
Or customize the % of color for white shaded illustration.
I searched in config folder (all the *.xml files) but didn’t find anything.
So I've gone through and have set up my test system and the properties on it to republish out of date items. So I changed a component that is used in an assembly. The assembly doesn't start republishing. doesn't watermark the picture on the Details page and does not even register or show up when you Schedule a job to RepublishAllOutOfDateRepresentations. I am on Windchill M030-CPS09 with the latest adapters which are M032. Anyone have any ideas of how to get this to work?
Has anyone had any experience with Word documents that are, presumably, unable to publish to PDF due to file size? There have been multiple times where I encountered documents that are not publishing; and after some investigating, I am still unsure of why they will not publish. However, the trend I am noticing is that usually when I cannot find a cause, they are also very large documents. I think it is somewhere in the ballpark of 100mb where I notice the issue.
Something to note: MS Word actually has a hard limit itself at 512mb (and yes, we have hit that limit before). Really, the only way you get to 100mb+ in a word document is if you have a whole mess of pictures or scanned documents inserted into the document.
Has anyone else encountered this?
Thanks!
Colten
For reference: Office Document CADWorker is currently using Creoview Adapters 2 M040
How to get a Creo drawing hyperlink to open in Creo View?
I created a note in the drawing and Add Hyperlink.
I save as, save a copy and select the type as Creo View (*.pvz)
Open Creo View of the drawing, but link is broken. Not even text.
Is this functionality available? Any workaround? Pdf works.
Thank you for any help. Dan
I have a extremely large model that I need to dimension/ make views of. Is it possible to open this model in Creo View and do the following:
1.Dimension
2.Make Separate views, notes, gd&t, etc.
3. Make a drawing from it?
I think it would be extremely beneficial if we could do most of the drawing work in Creo View, then use that information to make a drawing off of.
Thanks,
Brock
Is it possible for creo view to translate a drawing to a different language?
Thanks,
Brock
I'm using Wildfire 3.0 and Creo 2.0 on same PC
but there is a display problem only Creo 2.0 like below images
and I have tried to change config and graphic options.
please let me know how to solve the problem.
thank you
-edge_display_quality very_high
-shade_quality 50
-display_shilhouette_edges
-skip_small_surfaces
-default_abs_accuracy 0.00012 (1.2e-4)
-set antialiasing mode on
-Control Pannel/ Graphic Card:Manage 3d setting: PTC Pro/Engineer / Creo 2.0
Is there any way to open 3D files (from CREO) on Android tablet?