Dear all,
On some workstations, Creo View 3 does not print DRW files. The strange thing is that 3D models can be printed without any problems. Does anyone encountered this issue and perhapse have an idea to solve this?
Thanks in advance!
Regards,
Michiel
We are planning to use the Creo View 3.0 Web Tool Kits to publish our Technical Documents over the web browser. There isn't much information available, besides the PTC Developer Guide. Has anyone implemented this toolkit and can share experience how you did it?
Can anybody help me understand what are different file types in an unzipped pvz of a Creoview of an Assembly? I have noticed -.pvs, xxx.ol and xxx.pvs files.
Screenshot attached below.
Thanks in advance.
Hello,
I am looking for creo view toolkit, Please share the link to download creo view toolkit setup.
Thanks,
Sudhakar
Hi Everyone,
I'm having problems with some of our stations (mostly laptops with onboard intel graphics) which are working with Creo View 2.0. The program is able to open and view models and drawings but when the user selects print the image prints as a solid black page. This is repeatable accross all printers and even print to PDF converters. Has anyone seen this before and is there a known fix?
Thanks
Dave
Hi all,
We have had an issue with PTC Creo View 3.0 (MCAD). First of all, I'm not the actual user of the software, and I'm not too familiar with it.
One of our users however was working in the software when it crashed (do not know why). After the crash he opened the project again, but
when he tried to view the assembly, nothing shows up. The tree shows all parts with a small red x now (see screenshot). Does anybody have
an idea of what went wrong and/or how to fix it? The user spent several hours on the changes, saving regularly, but now has to start over...
Thanks in advance
Dominiek
Hello!
Im from germany, so please don't mind my bad english :-)
I've got a problem with Creo Parametric 3.0 on Windows 10 (64bit)
The last weeks Creo works fine, but today I grabed accidentally my "Platzierung/Placement" button and now all the parameters disappeared.
I can't do any new placements now.
I already restart the system 2 times and completly reinstalled my Creo Software. The other buttons (Bewegung/move) working fine!
The only thing I can do is "Alt +Tab" to make the Placement window visible, but I can't change anythink because when I click on it, it disappears again.
Thanks a lot for your help, and have a nice day!
how to add jogs on a explode line like creo parametric can do?
look the attached file
Hello, everyone.
I would like to know if it is possible to change the colours of the parts in an assembly in Creo View Express.
I have some problems with visualization of the plastic injection mould in Creo View Express 2.0.
The plates that were grey in Creo Parametric become black in Creo View Express. And some of them are represented in a wireframe mode.
So it's difficult to distinguish one part from another.
You can see what I mean in the pictures below.
Thanks in advance.
Vladimir.
We are running Windchill 10.0. I have one pc that can login okay, can find a part and when he selects the assembly he can select open in Creo View 2.0 and the viewer opens, but never displays the part. I have tried three different browsers, two different users on the computer and two different users on Windchill, so the problem appears to be the computer. I have checked Java version and that is okay, not sure what is going on.
Hi,
short question: can i modify the CV3.1 start Picture (with the racecar) ?
i want to start yith my own Picture and the datecode.
Thanks
Ralf
I'm using Wildfire 3.0 and Creo 2.0 on same PC
but there is a display problem only Creo 2.0 like below images
and I have tried to change config and graphic options.
please let me know how to solve the problem.
thank you
-edge_display_quality very_high
-shade_quality 50
-display_shilhouette_edges
-skip_small_surfaces
-default_abs_accuracy 0.00012 (1.2e-4)
-set antialiasing mode on
-Control Pannel/ Graphic Card:Manage 3d setting: PTC Pro/Engineer / Creo 2.0
Is there a way to put welding symbols in an engineering drawing in Creo 3.0? Specifically, I just want to define a groove weld on a pipe all the way around.
Hello!
Im from germany, so please don't mind my bad english :-)
I've got a problem with Creo Parametric 3.0 on Windows 10 (64bit)
The last weeks Creo works fine, but today I grabed accidentally my "Platzierung/Placement" button and now all the parameters disappeared.
I can't do any new placements now.
I already restart the system 2 times and completly reinstalled my Creo Software. The other buttons (Bewegung/move) working fine!
The only thing I can do is "Alt +Tab" to make the Placement window visible, but I can't change anythink because when I click on it, it disappears again.
Thanks a lot for your help, and have a nice day!
Hi,
i'm seaching the "What's new" slides for the new CV4.
Can anybody help ?
Thanks
Ralf
I'm doing a drawing with holes. If I use "show model annotations" and select on the feature, it shows the dimesions for that feature in that view.
In Wildfire I had an option to show all dimensions, and it would show hole dimensions, and the depth in a perpendicular view. I could then edit the hole diameter dimension to include the depth. [why isn't this an option to show with the diameter dimension? It should have been added a long time ago]
Anyways, in Creo I show the dimensions for that feature, and the depth does not show. I have to go to another view, turn that view to show hidden, find the feature, and then show the dimension.
Am I missing some simple means of getting the hole depth, or did Creo lose something along the way?
Is there any way to open 3D files (from CREO) on Android tablet?
Hello all,
is there any way (or workaround) to define various color schemes for a part or assembly model?
For example, when we are working on an assembly, we use different colors to distinguish the different components. Also, at the same time and when we have to make some rendered representations, we have to define some other colors in order to simulate reality as close as possible.
Any ideas? How can someone switch from one color scheme to the other?
Thanks in advance.
Vassilis Anagnostopoulos
Hello,
I am looking for creo view toolkit, Please share the link to download creo view toolkit setup.
Thanks,
Sudhakar
Creo View Drawing Compare.. seems like we took something that should be easy and made it very hard. Why can't I find the drawing I want to compare two seperate revisions or iterations of that I find on the details page with the history tab, select the two objects and choose open in CREO VIEW. Then In Creo View I should be able to do something as easy as select the two and pick a compare action.
What is the deal with adding to clipboard "and you cannot add them both from the history tab, it claims it adds them but it dosn't". You have to go to each of the objects detail page in order to have the drawings show up on the clip board. Now you have to go to the clipboard and select both objects and choose to open in Creo view.
Once you get the objects in Creo.. not very intuitive regarding the compare option or getting the overlay of the two drawings....