When creating an illustration, and using section view of the model, capping the section does not affect to the SVG export in any way.
Creo Illustrate needs to cap the section when exporting to SVG as well. The lines behind the capped geometry are visible in the SVG export, but not in the illustration.
Attached are the capped section.png which shows what is the illustration setup, and SVG export that has been done from the illustration.
Related PTC Case: CS257887
Hello everyone,
I' m realy struggeling with the customization of creo view 3.0 for our users. For the preferences I'm using the *pref.xml files like shared_pred.xml.
But how do I get the pvlite_customization.ui shared for the clients?
Thanks in advance,
Fred
i have a parameter, NB, integer for the number of clamping bolts.
in the drawing i have a callout note on the top view that i want it to say 4x M16x30.
the problem is that i cannot make it without a space between x and the param: &NB:9 x M16x30.
if the param is a real number, i can do it like this and it works: &NB:9[.0]x M16x30 without the space.
Is there any way of doing that for an int?
i've tried the upper approach and it of course doesn't work. I've also tried to enclose it in curly brackets {&NB:9}x and it also doesn't work (it shows the brackets in the notes).
Is there any way to open 3D files (from CREO) on Android tablet?
I currently have custom gaming PC which has a Gigabyte Nvedia 770 with 4gb built in and 8gb of ram, although it is not designed for CAD I believe that it could run better than my integrated graphics on my 3770k.
I'm not sure but I believe that Creo is only using my CPU which is being over loaded, I even got a new cooler when it reached 105 degrees C when rendering.
Does someone know who to check in Creo parametric what graphics card is being used and if there is a way of switching to my other graphics card.
Greatly appreciated if anyone can help.
Dear Experts,
I need your help to fix this burning issue
Most of the drawings look good when we open it from Creo2.0 parametric, even the quality of export to PDF from parametric looks good,
However when I open the same drawing in creo view 2.0 it looks horrible despite the fact that I had set an environment variable PVIEW_PRINT_MINIMUM_LINE_WIDTH with value as 0.2
Can any one help me out on this
Thanks in advance,
Regards,
Athmanand
Can anybody help me understand what are different file types in an unzipped pvz of a Creoview of an Assembly? I have noticed -.pvs, xxx.ol and xxx.pvs files.
Screenshot attached below.
Thanks in advance.
I have a large assembly with several sub-assemblies. Each subassembly contains a skeleton model. Some of these skeleton models have geometry representing space claims. If I open any of the skeleton models by itself, the geometry is displayed. If I open an assembly containing the skeleton, the geometry is not displayed. How can I make the skeleton geometry display in the assembly?
Using Creo 3.0 and creating multiple view states. All is fine and good in creo, but once we publish to the viewer (creo viewer light) we are missing complete welds or just the leader lines, and sometimes dimensions. This seems to only occur on assemblies that are rather big (4000 + features) Currently on build M030 and windchill 10.2. Exhausted all avenues of help with PTC, even sent them a weldment file and they had the same issues and no clue how to resolve.
Has anyone had any experience with Word documents that are, presumably, unable to publish to PDF due to file size? There have been multiple times where I encountered documents that are not publishing; and after some investigating, I am still unsure of why they will not publish. However, the trend I am noticing is that usually when I cannot find a cause, they are also very large documents. I think it is somewhere in the ballpark of 100mb where I notice the issue.
Something to note: MS Word actually has a hard limit itself at 512mb (and yes, we have hit that limit before). Really, the only way you get to 100mb+ in a word document is if you have a whole mess of pictures or scanned documents inserted into the document.
Has anyone else encountered this?
Thanks!
Colten
For reference: Office Document CADWorker is currently using Creoview Adapters 2 M040
we need creo illustrator & service part from TC PLM system , but we don't sure manu question below?
When we export images from Creo Illustrate, it always prompts with the workspace.
We do not want to store our output in workspaces, but on a local drive, hence, a lot of browsing.
Creo Parametric has a Favorites location, where the paths are stored in config.pro.
Can Creo Illustrate do the same, with paths specified in e.g. wgmclient.ini?
Is there a way to put welding symbols in an engineering drawing in Creo 3.0? Specifically, I just want to define a groove weld on a pipe all the way around.
Is there any way to open 3D files (from CREO) on Android tablet?
Hallo,
anyone knows how to measure the volume of a model in Creo View?? in the measurements summary I do not see the volume icon like in Creo Parametric, and it seems strange to me to not have such a fundamental tool...
thanks
Bye
I would like to start expressing my drawing model views according the european system. Do you know how I can change from the american system to the european system?
Thank you
Vasco
I'm doing a drawing with holes. If I use "show model annotations" and select on the feature, it shows the dimesions for that feature in that view.
In Wildfire I had an option to show all dimensions, and it would show hole dimensions, and the depth in a perpendicular view. I could then edit the hole diameter dimension to include the depth. [why isn't this an option to show with the diameter dimension? It should have been added a long time ago]
Anyways, in Creo I show the dimensions for that feature, and the depth does not show. I have to go to another view, turn that view to show hidden, find the feature, and then show the dimension.
Am I missing some simple means of getting the hole depth, or did Creo lose something along the way?
Can anybody help me understand what are different file types in an unzipped pvz of a Creoview of an Assembly? I have noticed -.pvs, xxx.ol and xxx.pvs files.
Screenshot attached below.
Thanks in advance.
Who can help with this error 38 ?
Hello all,
is there any way (or workaround) to define various color schemes for a part or assembly model?
For example, when we are working on an assembly, we use different colors to distinguish the different components. Also, at the same time and when we have to make some rendered representations, we have to define some other colors in order to simulate reality as close as possible.
Any ideas? How can someone switch from one color scheme to the other?
Thanks in advance.
Vassilis Anagnostopoulos
